A.4 Scanner Options - Fujitsu fi-7160 Operator's Manual

Appendix

A.4 Scanner Options

Name
Imprinter PA03670-
D201
Black Document Pad PA03670-
D801
ScanSnap Carrier Sheets PA03360-
0013
For details about purchasing the scanner options and more information, contact your FUJITSU scanner dealer or an authorized
FUJITSU scanner service provider.
Model Supported
model
fi-7160 An option imprinter that can print text (e.g. alphabets, numbers) on the back of the
fi-7180 document after scanning.
It can be used to organize your documents by printing a name, date or serial number on
the scanned document.
For details, refer to the fi-718PR Imprinter Operator's Guide.
fi-7260 An option that enables scanning in black background on the flatbed.
fi-7280 It is available as a document cover with a black document pad, and can be replaced with
the standard document cover that has a white document pad.
It can be used to automatically correct skewed images or accurately detect the size of
the scanned document when scanning with the flatbed.
fi-7160 Use this option to scan documents larger than A4/Letter size, as well as non-standard
fi-7260 size documents such as photographs and clippings.
fi-7180 Using the Carrier Sheet allows you to scan documents that are larger than A4/Letter size
fi-7280 such as A3 and B4, scan documents that can be easily damaged such as photographs,
and scan documents that are difficult to load directly such as newspaper clippings.
When the Carrier Sheet is too damaged or worn out to be used for scanning, it can be
purchased separately (5 sheets per set).
The Carrier Sheet should be replaced approximately every 500 scans.
However, replace it if damage or dirt is noticeable.
Description
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
214