How To Use The Operator Panel; Various Ways To - Fujitsu FI-7600 Operator's Manual

Chapter 1 Scanner Overview
■Back
ADF Release Tabs
Lift up these tabs to unlock and open the ADF.
Feed Mode Switch
Slide the feed mode switch to the left to switch the feed mode to Manual/Single mode.
Side Guide Locks
Lock the side guides.
Power Connector
Used to connect the power cable.
"Power cable" refers to the AC cable and AC adapter connected together.
USB Connector
Used to connect a USB cable.
EXT Connector
Used to connect the imprinter.
The imprinter is used to print text (such as letters or numbers) after a document is
scanned, and is available as an option. It can be useful for managing documents when
you add a name, date or serial number on scanned documents. For details, refer to
"A.4 Scanner Options" (page 215).
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel

Various Ways to

Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
18