Image Quality Is Poor When Scanning Pictures/Photos In Black & White; How To Scan - Fujitsu fi-65F Operator's Manual

Chapter 6 Troubleshooting
Image quality is poor when scanning pictures/
photos in black & white.
Did you perform a scan with grayscale or other scan
settings that do not simply "binarize" (output in black &
white)?
Yes
Are the document pad and the document bed clean?
Yes
*1: The scanned image may differ from the original image significantly if you simply "binarize" (output in black & white) a picture or a photo. If possible, use a
scanner driver to configure grayscale or other scan settings that do not simply "binarize" (output in black & white), and then perform a scan.
Use a scanner driver to configure grayscale or other scan settings that do not
simply "binarize" (output in black & white), and then perform a scan.(*1)
No
Perform cleaning.
For details, refer to "Chapter 5 Daily Care" (page 34).
No
If the problem persists, check the items in
Service Provider" (page 52) first, then contact your FUJITSU scanner dealer or an
authorized FUJITSU scanner service provider.
"6.2 Before You Contact the Scanner
TOP
Contents
Index
Introduction
Scanner
Overview

How to Scan

Documents
Configuring the
Scan Settings
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Appendix
Glossary
44