Image Quality Is Poor When Scanning Pictures/Photos In Black & White - Fujitsu 6240 - fi - Document Scanner Operator's Manual

Chapter 8 Troubleshooting
Image quality is poor when scanning pictures/
photos in black & white.
Are you scanning in "Halftone" or "Grayscale"?
Yes
Are the glasses inside the ADF clean?
Yes
*1: The scanned image may differ from the original image significantly if
you simply "binarize" (output in black & white) a picture or a photo. If
the setting can be configured from the scanner driver's setup dialog
box, set the image mode to [Halftone] or [Grayscale].
Select [Halftone] or [Grayscale] in the scanner driver and scan. (*1)
No
Clean the inside of the ADF.
For details, refer to "Chapter 6 Daily Care" (page
No
If the problem persists, check the items in
Service Provider" (page 149)
an authorized FUJITSU scanner service provider.
108).
"8.4 Before You Contact the Scanner
first, then contact your FUJITSU scanner dealer or
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
134