Quality Of Scanned Pictures Or Photos Is Not Satisfactory When Scanning In Black And White - Fujitsu Fi-6750S Operator's Manual

Chapter 8 Troubleshooting
Quality of scanned pictures or photos is not sat-
isfactory when scanning in black and white.
Did you select "halftoning" or "grayscale"?
YES
Are the upper/lower glasses inside the ADF clean?
YES
*1: When scanning pictures or photos simply in binary black-and-white
mode, the generated image might significantly differ from the originals.
If possible, set the image type on the scanner driver to "halftoning" or
"grayscale" before scanning.
In the scanner driver, select "halftoning" or "grayscale" before scanning
documents.(*1)
NO
Clean the dirty locations.
For how to clean the dirty locations, refer to
NO
If you cannot solve the problem after taking the measures above, check the items
shown in "8.4 Before Contacting Your Dealer or Scanner Service Provider" (on
page 152), and then contact the dealer where you purchased the scanner or an
authorized FUJITSU scanner service provider.
"Chapter 6 Daily Care" (on page 114).
TOP
Contents
Index
Introduction
Scanner
Overview
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Consumables
Trouble-
shooting
Operational
Settings
Appendix
Glossary
140