Chapter 7 Troubleshooting
Image quality is poor.
Did you configure the settings in the scanner driver to scan
in black & white mode?
No
ADF:
Are the glass and rollers inside the ADF clean?
Flatbed [fi-7700/fi-7700S]:
Are the document pad and the document bed clean?
Yes
*1: The scanned image may differ from the original image significantly if you simply "binarize" (output in black & white) a picture or a photo.
Use a scanner driver to configure the scan settings that do not "binarize" (output in
black and white), and then perform a scan. (*1)
Yes
Clean the dirty parts.
For details, refer to
"Chapter 5 Daily Care" (page
No
If the problem persists, check the items in
Service Provider" (page 152)
an authorized FUJITSU scanner service provider.
102).
"7.4 Before You Contact the Scanner
first, then contact your FUJITSU scanner dealer or
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
139