Interface Settings/Ieee 1394 (Option) - Ricoh Aficio 1075 Operating Instructions Manual

Hide thumbs Also See for Aficio 1075:

Table of Contents

Interface Settings/IEEE 1394 (option)

You must install the IEEE 1394 Interface Board (option) into the machine.

❖ ❖ ❖ ❖ IP Address

When you connect this machine to a network using the IEEE 1394 Interface

Board (option), you must configure the IP address.

❒ Default setting: 000.000.000.000

❒ When you use the IEEE 1394 interface on a network, you cannot use the

Ethernet interface in the same domain. To use in the same domain, set a

different value for the Sub-net Mask.

❖ ❖ ❖ ❖ Sub-net Mask

This is a number used to mathematically "mask" or hide an IP address on the

network by eliminating those parts of the address that are alike for all ma-

chines on the network.

❒ Default setting: 000.000.000.000

❒ When you use the IEEE 1394 interface on a network, you cannot use the

IEEE 1394 interface in the same domain. To use in the same domain, set a

different value for the Sub-net Mask.

❒ Press the [← ← ← ← ] or [→ → → → ] key to move in 3-digit increments.

❒ Press the [Clear] key when the wrong address is entered.

❖ ❖ ❖ ❖ IP over 1394

When you use the IP over 1394 function of the IEEE 1394 interface to connect

the machine to the network, or you print using a personal computer with the

IP over 1394 driver, you must set IP over 1394.

❒ Default setting: Active

For details, see the Printer Reference 1.

❖ ❖ ❖ ❖ SCSI print (SBP-2)

When you print using the SCSI Print client function supported by Windows

2000 or Windows XP, you must set SCSI Print.

❒ Default setting: Active

Settings You Can Change with User Tools

Table of Contents