Other Printing Problems - Ricoh Aficio 1075 Operating Instructions Manual

Other Printing Problems

Status
The print on the If "Toner Saver" is selected in the [Print Quality] tab on the printer driver tab,
entire page is fad- the entire page will be faded when printed.
ed.
See the printer driver's Help.
The print smudg- The settings have not been set to thick paper when printing on thick paper.
es.
• PCL 6/5e and PostScript 3
• RPCS™
When printing If the printer driver is configured to use the graphics command, the graph-
graphic data, the ics command from the machine is used to print.
output and the
If you want to print accurately, set the printer driver to print without using
screen are differ-
the graphics command.
ent.
See the printer driver's Help.
Page layout is not Print areas differ depending on the machine used. Information that fits on
as expected. a single page on one machine may not fit on a single page of another ma-
chine.
Adjust the [Printable area] setting in the [Printer Configuration] dialog box on
the [Print Settings] tab in the RPCS™ printer driver.
See the printer driver's Help.
Duplex printing is • Duplex printing cannot be done with paper set in the bypass tray.
malfunctioning.
• Duplex printing cannot be done with thick paper, OHP transparencies,
• Duplex printing cannot be done with a tray for which [1-Sided Copy] has
When using Win- Make sure the application's paper size and orientation settings match those
dows 95/98/Me, of the printer driver.
Windows 2000/XP,
If a different paper size and orientation are set, select the same size and ori-
or Windows NT4.0,
entation.
either combined
printing or booklet
print does not come
out as expected.
When using Win-
dows 95/98/Me,
Windows 2000/XP,
or Windows NT4.0,
Auto Reduce/En-
large print does not
come out as expected.
Possible Causes, Descriptions, and Solutions
Select "Thick" for [Type] on the printer driver's [Paper] tab.
Select "Thick" for [Paper Type] on the printer driver's [Print Settings] tab.
When using duplex printing, make settings to use paper from a tray
other than the bypass tray.
labels, or thin paper specified as the paper type. Specify another paper
type.
been specified as "Paper Type" on the System Settings menu. Change
the "Paper Type" setting for the tray to [2-Sided Copy] on the System Set-
tings menu. See the General Settings Guide.
Other Printing Problems
4
39