Displaying The Status Of Printer - Ricoh Aficio 1075 Operating Instructions Manual

Hide thumbs Also See for Aficio 1075:

Table of Contents

A Click [NetBEUI].

B Type the name into the [Computer Name] box and comment into the [Com-

• In the [Computer Name] box, type the name that helps you to identify

printers using the NetBEUI protocol. The factory default name consists

of "RNP" and the last 3 bytes of the MAC address on the Network In-

t e r f a c e B o a r d . F o r e x a m p l e , w h e n t h e M A C a d d r e s s i s

00:00:74:62:7D:D5, the factory default name is "RNP627DD5". A maxi-

mum of 13 characters consisting of uppercase English letters, numeric,

or symbols (except "*+,/:;<=>?[\]|. and space) can be used. No name is

permitted if the prefix is "RNP". You must avoid the duplication of the

same name on a network.

• In the [Comment] box, type any comment on printers in under 31 charac-

Click [Apply].

The setting is transmitted to the printer.

Exit the Web browser.

Displaying the Status of Printer

You can view the status of printers using SmartNetMonitor for Admin, Smart-

NetMonitor for Client, or Web browser.

SmartNetMonitor for Admin

Run SmartNetMonitor for Admin.

Click the [Group] menu, point to [Search Device], and then select [TCP/IP] or

The status of printers is indicated with an icon in the list.

❒ For more information about the status icons, see SmartNetMonitor for Ad-

Getting further information, click the desired printer to select from the list,

and then click [Open] on the [Device] menu.

The status of the printer is displayed on the dialog box.

❒ For more information about each item on the dialog box, see Help.

Table of Contents