Ricoh Aficio 1075 Operating Instructions Manual page 561

NetWare 4.x, 5/5.1
A Select the container object the printer is located in, and then click [Create]
in the [Object] menu.
B In the [Class of new object] box, click "Printer", and then click [OK]. When
you are using NetWare 5/5.1, click "Printer (Non NDPS)".
C In the [Printer name] box, type the name of the printer.
D Select the [Define additional properties] check box, and then click [Create].
M M M M
Assign print queues to the created printer as follows:
NetWare 3.x
A From [Print Server Configuration Menu], select [Queues Serviced By Printer].
B Select the printer created in step
C Press the { { { { INSERT} } } } key to select a queue serviced by the printer.
Note
❒ You can select more than one queue at a time.
D Follow the instructions on the screen to make other necessary settings.
When you have finished the above steps, make sure that the queues are as-
signed.
E Press the { { { { ESC} } } } key until "Exit?" appears, and then select [Yes] to exit
PCONSOLE.
F Start the print server by typing the following from the console of the
NetWare Server.
If it is running, restart it after exiting it.
❖ ❖ ❖ ❖ To exit
CAREE: unload pserver
❖ ❖ ❖ ❖ To start
CAREE: load pserver print_server_name
Note
❒ If the printer works as configured, "Waiting for job" appears.
❒ NetWare 3.x ends here.
NetWare 4.x, 5/5.1
A Click [Assignments], and then click [Add] in the [Assignments] group.
B In the [Available objects] box, click the queue created in step
click [OK].
NetWare 3.x, 4.x, 5/5.1- Advanced Settings
L L L L
.
5
K K K K
, and then
75