Ricoh Aficio 1075 Operating Instructions Manual page 562

NetWare Configuration
C Click [Configuration], and in the [Printer type] box, select [Parallel] using the
drop-down menu, and then click [Communication].
D Click [Manual load] in the [Communication type] group, and then click [OK].
E After checking the settings, click [OK].
N N N N
Create a print server as follows:
A Select the context specified using the NIB Setup Tool (Step
the [Object] menu, click [Create].
B In the [Class of new object] box, click "Print Server", and then click [OK].
When you are using NetWare 5/5.1, click "Print Server (Non NDPS)".
C In the [Print Server name] box, type the name of the print server.
Important
❒ Use the same name as that specified using the NIB Setup Tool. (Step
D Select the [Define additional properties] check box, and then click [Create].
O O O O
Assign the printer to the created print server as follows.
5
A Click [Assignments], and then click [Add] in the [Assignments] group.
B In the [Available objects] box, click the queue created in the step
then click [OK].
C In the [Printers] group, click the printer assigned in step
[Printer Number].
D Type the printer number and click [OK].
Important
❒ Specify the same printer No. as used with the NIB Setup Tool. (Step
E).
E After checking the settings, click [OK].
P P P P
Start the print server by typing the following from the console of the Net-
Ware Server.
If it is running, restart it after exiting it.
❖ ❖ ❖ ❖ To exit
CAREE: unload pserver
❖ ❖ ❖ ❖ To start
CAREE: load pserver print_server_name
76
-A A A A ), and on
I I I I
H
).
K K K K
, and
B B B B
, and then click
I
-