Ricoh Aficio 1075 Operating Instructions Manual page 606

Appendix
Changing the password
Use the passwd command to change the remote maintenance password.
Important
❒ Be sure not to forget or lose the password.
Note
❒ The default password is "password".
A A A A
Type "passwd".
msh> passwd
B B B B
Type the current password.
Old password:
C C C C
Type the new password.
New password:
Note
❒ The password must consist of 3 to 8 alphanumeric characters and symbols.
Upper and lower case characters are considered unique. For example, R is
different from r.
❒ The password is the same as that used in the configuration of the Network
7
Interface Board using a Web Browser and that used in the NIB Setup Tool.
If you change a password from telnet, the other passwords are also
changed.
D D D D
Type the new password once again.
Retype new password:
SNTP
The printer clock can be synchronized with a NTP server clock using the Simple
Network Time Protocol (SNTP). To change the SNTP settings, use the sntp com-
mand. Confirm with the network administrator that the NTP server settings are
correct.
Limitation
❒ SNTP supports the NTP servers running xnptd V3 and V4.
❖ ❖ ❖ ❖ Reference
msh> sntp
❖ ❖ ❖ ❖ NTP Server Address Configuration
You can specify the IP address of the NTP server.
msh> sntp server IP_address
120