Ricoh Aficio 1075 Operating Instructions Manual page 713

ScanRouter V2 Lite
ScanRouter V2 Lite is to be installed on the delivery server. The data scanned by
the machine can be sorted on the delivery server, stored in specified in-trays, or
saved in folders of client computers on the same network.
For more information, see the manuals for ScanRouter V2 Lite or ScanRouter V2
Lite Help file.
❖ ❖ ❖ ❖ File storage folder
The files are stored in the following folder on the CD-ROM provided with this
machine.
\UTILITY\ROUTERV2
❖ ❖ ❖ ❖ System requirements
The following system requirements must be met to use ScanRouter V2 Lite.
Limitation
❒ If you install this software in OS in which a client server, such as Windows
NT Workstation and Windows 2000 Professional, cannot be permitted to
use in a network, you may violate the license agreement of Microsoft Cor-
poration.
Note
❒ Install the software on a stand-alone server running Windows NT Server
or Windows 2000 Server. It must not be installed on the primary domain
controller or backup domain controller.
• Hardware
PC/AT compatible
• CPU
Pentium 200 MHz or faster (Pentium II 350 MHz or faster recommended)
• Operating system
Microsoft Windows 95 (OSR 2 or later)
Microsoft Windows 98
Microsoft Windows Millennium Edition
Microsoft Windows XP Professional
Microsoft Windows XP Home Edition
Microsoft Windows 2000 Server (Service Pack 1 or later)
Microsoft Windows 2000 Professional (Service Pack 1 or later)
Microsoft Windows NT Server 4.0 (Service Pack 5 or later)
Microsoft Windows NT Workstation 4.0 (Service Pack 5 or later)
• Memory
64 MB or more (128 MB or more recommended)
• Hard disk space
Minimum free space required for installing: 200 MB
Note
❒ In addition to the space required for installation, the hard disk should
have at least 500 MB of free space for files.
Installing Software
41
2