Ricoh Aficio 1075 Operating Instructions Manual page 767

Message
Memory is full.
Cannot scan.
Memory is full.
Cannot scan. Only sending stored files is avail-
able.
Note
❒ These messages are shown alternately.
Memory is full.
Delete the unnecessary stored files.
Note
❒ These messages are shown alternately.
Memory is full.
Press [Send] to send the current scanned data,
or press [Cancel] to delete.
Memory is full. Scanning has been cancelled.
Do you want to store the scanned data?
Note
❒ These messages are shown alternately.
No destination is programmed for this
number.
No HDD is available for this function. Cannot
store. Set original and select the TWAIN set-
tings from the PC.
No sender is programmed for this number.
Output buffer is full. Sending the data has
been cancelled. Please try again later.
Scanner is currently in use for another func-
tion.
Cannot scan.
Note
❒ These messages are shown alternately.
Scanning cannot continue because of insuffi-
cient memory space. Do you send the scanned
data? When the delivery is stopped, the
scanned data is deleted.
Possible Cause and Action
Because of insufficient hard disk space, the
first page could not be scanned. Try one of the
following measures.
• Wait for a while and retry the scan opera-
tion.
• Reduce the scan area.
• Delete unneeded stored files.
There is not enough free hard disk space. No
more files can be stored. Delete unneeded
files.
There is not enough free hard disk space. De-
lete unneeded files.
Because there is not enough free hard disk
space in the machine, the page could only be
partially scanned. Specify whether to use this
data or not.
Because there is not enough hard disk capacity
in the machine, the page could only be partial-
ly scanned. Specify whether to use the data or
not.
The short ID number that can be assigned to
each destination is not programmed in the de-
livery server. Assign a correct number to each
destination.
Files can be scanned with TWAIN by switch-
ing to the network TWAIN scanner.
The short ID number that can be assigned to
each sender is not programmed in the delivery
server. Assign a correct number to each send-
er.
Too many files are in waiting. Please try again
after they have been delivered.
The machine is currently using the scanner for
another function, such as copying. Retry the
operation after the other function is complet-
ed.
Scanning has not been completed because of
insufficient hard disk space in the machine.
Select whether or not the scanned file is deliv-
ered.
Troubleshooting
8
95