Placing The Original In The Automatic Document Feeder (Adf) - Ricoh Aficio 1075 Operating Instructions Manual

Placing the Original in the Automatic
Document Feeder (ADF)
The ADF allows you to insert several
originals at one time. Originals placed
in the ADF can be scanned on one
side or both sides.
❖ ❖ ❖ ❖ Originals that can and cannot be
placed in the ADF
For information about the origi-
nals that can and cannot be placed
in the ADF, see the Copy Reference
manual.
Attempting to use unsuitable orig-
inals in the ADF can lead to mis-
feed and damage to the original.
Place such originals directly on the
exposure glass.
Important
❒ For information about which
original sizes can be detected
automatically and notes on
placing originals in the ADF,
see the Copy Reference manual.
A A A A
Align the original guide with the
original size.
B B B B
Insert the originals with the side
to be scanned facing up. (For orig-
inals which are to be scanned on
both sides, the first side should
face up.)
There are two orientations. Either
orientation can be used for place-
ment.

Placing the Original in the Automatic Document Feeder (ADF)

Note
❒ When using the network deliv-
ery scanner and document serv-
er, or th e network T WAIN
scanner, originals with different
sizes can be placed at the same
time. Place the originals as
shown in the figure below.
❒ Originals are scanned in the in-
serted order, starting with the
topmost page.
A Place the original so that the
top edge is in the ADF tray.
3
ZGZY080E
ZGZY020E
45