Windows Xp Configuration; Configuring Windows Xp; Printing Without A Print Server; Printing With A Standard Tcp/Ip Port - Ricoh Aficio 1075 Operating Instructions Manual

Hide thumbs Also See for Aficio 1075:

Table of Contents

3. Windows XP Configuration

The following procedure describes how to configure Windows XP to use the ma-

chine on a network without Windows 2000 Server, Windows 2000 Professional,

Windows XP Professional, Windows XP Home Edition, Windows NT Server,

Windows NT Workstation or NetWare based print server.

Specify the protocol to use.

Consult your network administrator about which of the two protocols is ap-

Configure the protocol.

• See p.37 "Configuring TCP/IP and IPP for Printing".

Install the software and set the printer driver port.

• Install SmartNetMonitor for Client from the CD-ROM labeled "Printer

Drivers and Utilities". For more information about how to install the soft-

ware and how to specify the printer driver port, see the Printer Reference 1.

Standard TCP/IP port is a standard port of Windows XP to enable Peer-to-Peer

printing in a network environment.

For more information about Standard TCP/IP port settings, see Windows XP

❒ If a device model selection dialog box appears during the procedure to add

the standard TCP/IP port, select "RICOH Network Printer C Model".

Table of Contents