Procedure For Sending E-Mails - Ricoh Aficio 1075 Operating Instructions Manual

Sending Stored Scan Data by E-mail

Procedure for Sending E-mails

Data is sent after specifying scan set-
tings and destination. If necessary,
you can select a sender and a subject.
A A A A
Press the { { { { Scanner} } } } key.
B B B B
If user codes are set, enter a user
code (consisting of up to eight
6
characters) with the number keys,
and then press the { { { { #} } } } key.
The scanner function screen is dis-
played.
Reference
For information about the user
code, see the General Settings
Guide.
Note
❒ If the network TWAIN scanner
screen is displayed, press [Can-
cel].
C C C C
Make sure that no previous set-
tings remain.
Note
❒ If a previous setting remains,
press the { { { { Clear Modes} } } } key.
68
D D D D
Place the original in the machine,
and adjust the settings for origi-
nal size and orientation if re-
quired.
Reference
⇒ p.43 "Setting Originals"
E E E E
If the network delivery scanner
screen appears, switch to the
screen for sending e-mail.
A Press [
The Search/Switch List screen
is displayed.
ZGZS331E B Press [Switch Destination List].
The switch destination screen is
displayed.
C Press [E-mail].
D Press [Exit].
The send e-mail screen is dis-
played.
Reference
⇒ p.25 "Making Scanner Set-
tings".
].