Installing Smartnetmonitor For Client - Ricoh Aficio 1075 Operating Instructions Manual

Windows NT 4.0 Configuration

Installing SmartNetMonitor for Client

Install SmartNetMonitor for Client from the CD-ROM labeled "Printer Drivers
and Utilities". For more information about how to install, see the Printer Refer-
ence 1.
After the installation is complete, configure the printer port with SmartNetMon-
itor for Client. See p.53 "Setting Up the Printer Driver".
Deleting the port
The following procedure allows you to delete the printer port. If you want to de-
lete the port which is currently used in Windows, switch the port to another such
as "FILE", and then delete it. For more information about SmartNetMonitor for
4
Client, see SmartNetMonitor for Client Help.
A A A A
From the [Printers] window, click the icon of the printer which uses Smart-
NetMonitor for Client to print. On the [File] menu, click [Properties].
B B B B
Click the [Ports] tab, and then make sure that the SmartNetMonitor for Cli-
ent port is shown in the [Print to the following port] box.
Remember the port name because this port should be deleted later.
C C C C
From the [Print to the following port] box, select [FILE].
D D D D
Click [Apply].
The port which is currently in use is changed.
E E E E
Click [Delete Port].
F F F F
After the confirmation message appears, click [Yes].
The port is deleted.
G G G G
Click [OK] to close the printer properties.
Uninstalling SmartNetMonitor for Client
Preparation
Before uninstalling SmartNetMonitor for Client, make sure that:
• The port settings dialog box is closed.
• No printer is using the SmartNetMonitor for Client port as a printer port.
• You have performed login with the same user authority as that used to in-
stall SmartNetMonitor for Client.
A A A A
Open [Control Panel], and then double-click the [Add/Remove Programs] icon.
52