Netware 3.X, 4.X, 5/5.1- Advanced Settings - Ricoh Aficio 1075 Operating Instructions Manual

NetWare Configuration
NetWare 3.x, 4.x, 5/5.1- Advanced
Settings
The actual procedures for configuring the machine vary depending on whether
the Network Interface Board is configured as a print server or as a remote print-
er. This section describes how to configure the machine in the NetWare 3.x, 4.x,
5/5.1 environment.
NetWare 3.x Basic Procedure
Install the NIB Setup Tool
Print Server
Configure the Network Interface Board
5
Restart the printer
NetWare 4.x, 5/5.1 Basic Procedure
Install the NIB Setup Tool
Print Server
Configure the Network Interface Board
Configure the NetWare
Restart the printer
Preparation
The following procedures use the Property Sheet method in configuring the
Network Interface Board. If you configure the Network Interface Board as a
NetWare print server for the first time, we recommend you use the Wizard
method. See p.61 "Quick Setup Using the NIB Setup Tool Wizard" .
64
Remote Printer
Configure the NetWare
Start the print server
Remote Printer
Start the print server