Ricoh Aficio 1075 Operating Instructions Manual page 560

NetWare Configuration
B Press the { { { { INSERT} } } } key, and then type a print queue name.
C Press the { { { { ESC} } } } key to return to the [Available Options] menu.
NetWare 4.x, 5/5.1
A Select the container object the print queue is located in among those in
the directory tree, and then click [Create] on the [Object] menu.
B In the [Class of new object] box, click "Print Queue", and then click [OK].
C In the [Print Queue name] box, type the name of the print queue.
D In the [Print Queue Volume] box, click [Browse].
E In the [Available objects] box, click the volume in which the print queue is
created, and then click [OK].
F After checking the settings, click [Create].
L L L L
Create a printer as follows:
5
NetWare 3.x
A From the [Available Options] menu, select [Print Server Information], and then
press the { { { { ENTER} } } } key.
B To create a new print server, press the { { { { INSERT} } } } key, and then type a
print server name.
If you use a currently defined print server, select one of the print servers
shown in the [Print Server] list.
Important
❒ Use the same name as that specified in the NIB Setup Tool. (Step
C From the [Print Server Information] menu, select [Print Server Configuration].
D From the [Print Server Configuration] menu, select [Printer Configuration].
E Select the printer which is indicated as "Not Installed".
Important
❒ Use the same number as that specified as Remote Printer No. using the
NIB Setup Tool. (Step
F If you want to change the name of the printer, type a new name.
A name "Printer x" is assigned to the printer. x stands for the number of
the selected printer.
G Select [Remote Parallel, LPT1] as printer type.
The IRQ, Buffer size, Starting form, and Queue service mode are automat-
ically configured.
H Press the { { { { ESC} } } } key, and then click [Yes] in the confirmation dialog box.
I Press the { { { { ESC} } } } key to return to [Print Server Configuration Menu].
74
I
-D).
H
).