Ricoh Aficio 1075 Operating Instructions Manual page 619

Message
nwstart start. (NetWare)
Open log file <file name>
papd start. (AppleTalk)
permission denied.
phy release file open failed.
Print queue <print queue name> cannot be
serviced by printer 0, <print server name>
Print server <print server name> has no print-
er.
Print session full
Printer <printer name> has no queue
pserver start. (NetWare)
Required computer name (<Computer name>)
is duplicated name
Required file server (<file server name>) not
found
restarted.
sap enable, saptype=<SAP type>, sap-
name=<SAP name>
Set context to <NDS context name>
shutdown signal received. network service re-
booting...
smbd start. (NetBEUI)
Description and Solutions
The service for NetWare protocol stack setting
has started.
(In print server mode) The specified log file
has been opened.
AppleTalk print service has started.
Job cancellation was determined to be unau-
thorized after checking the user name and
host address (except for ROOT authorization).
Replacing the Network Interface Board is re-
quired. Contact your sales or service repre-
sentatives.
(In print server mode) The print queue name
cannot be serviced. Make sure that print
queue volume exists on the specified file serv-
er.
(In print server mode) The printer object is not
assigned to the print server <print server
name>. Using NWAdmin, assign the printer
object, and then restart the printer device.
Cannot accept the print session.
(In print server mode) The print queue is not
assigned to the printer. Using NWAdmin, as-
sign the print queue to the printer, and then
restart it.
(In print server mode) NetWare service has
started.
The same computer name is detected on the
network. The start job determines the compu-
ter name by adding the computer name to the
suffix (0,1....). Configure a new computer
name that is unique.
Cannot find the required file server.
LPD has started.
The SAP function has started. The SAP (SAP
type and SAP name) packet is issued to adver-
tise the service on the SAP table on the Net-
Ware server.
A <NDS context name> has been set.
Rebooting the network service.
An smbd (SMB (Server Message Block) serv-
ice) has started.
Message List
7
133