Host Interface - Ricoh Aficio 1075 Operating Instructions Manual

Hide thumbs Also See for Aficio 1075:

Table of Contents

Using the Control Panel

Edge to Edge Print

Quantity of Print Sets

Host Interface

You can select whether or not to leave margins on the paper.

❒ Default: Off

You can set the number of print sets when you use the PCL or

RPCS™ printer driver.

• 1 to 999 by 1

❒ Default: 1

You can set the size of the I/O Buffer. Normally it is not necessary

to change this setting.

❒ Default: 128 KB

You can set how many seconds the machine should wait before

ending a print job. If data from another port often arrives in the

middle of the print job, you should increase the timeout value.

• 10 seconds

• 15 seconds

• 20 seconds

• 25 seconds

• 60 seconds

❒ Default: 15 seconds

Table of Contents