Ricoh Aficio 1075 Operating Instructions Manual page 437

Possible Cause
When using Wireless
LAN, is the LED on the
Wireless LAN card lit or
blinking?
Is the Wireless LAN being
used in Ad Hoc mode?
Did you change the option
settings on the machine?
Confirm the orange LED is lit, and the green LED is lit or blinks
during transmission.
In that case, turn the main power switch off and on. Also, chang-
ing some of the settings in [Network] on the [Interface Settings] tab in
[System Settings] on the display panel may solve the problem.
When using the RPCS™ printer driver on Windows 2000 and con-
necting to the machine using the IEEE 1394 connection, an error
may occur if you change the option settings on the machine. In
this case, follow the procedure below.
A
Unplug the IEEE 1394 interface cables connected to the compu-
ter.
B
Run the utility tool for the IEEE 1394 Interface Board, which is
stored in the following path on the CD-ROM labeled "Printer
Drivers and Utilities".
\UTILITY\1394\
Reference
For more information about using the utility tool for IEEE
1394, see the README file in the same directory on the CD-
ROM.
C
Restart the computer.
D
Connect the computer to the machine using the IEEE 1394 in-
terface cables.
Machine Does Not Print
Solutions
4
37