Ricoh Aficio 1075 Operating Instructions Manual page 599

❖ ❖ ❖ ❖ IPP timeout configuration
Specify how many seconds to wait before canceling a print job if it has been
interrupted for some reason. The range of time can be changed between 30 to
65535 seconds.
msh> ipp timeout {30 - 65535}
❖ ❖ ❖ ❖ IPP user authorization configuration
Use the IPP user authorization to restrict users that can print with IPP. The de-
fault is "off" .
msh> ipp auth {basic|digest|off}
• "basic" and "digest" are user authorization setting.
• "off" removes the user's authorization.
Note
❒ If you select "basic" or "digest", see next section "Configuring the IPP User
Authorization" for how to configure the user name. Up to ten user names
are available.
❖ ❖ ❖ ❖ Configuring the IPP user authorization
Use the following command:
msh> ipp user
The following message appears.
Input user number (1 to 10):
Type the number, user name and password.
IPP user name:user1
IPP password:*******
After configuring the settings, the following message appears.
IPP configuration changed.
Direct Printing Port
The direct printing port allows printing directly from a computer, connected to
the network, to the printer.
Use the diprint command to change the direct printing port settings.
❖ ❖ ❖ ❖ View settings
The following command displays the current direct printing port settings.
msh> diprint
Example output:
port 9100
timeout=300(sec)
bidirect off
• The "Port" specifies the port number of the direct printing port.
• The "bidirect" setting indicates whether the direct printing port is bidirec-
tional.
Remote Maintenance by telnet
7
113