Ricoh Aficio 1075 Operating Instructions Manual page 258

Troubleshooting
Machine Status
Misfeeds occur frequently.
An error message remains,
even if misfed paper is re-
moved.
Cannot duplex print
6
During saddle stitching,
paper comes out open and
not neatly stacked.
The user code entry dialog
box is displayed.
114
Problem/Cause
The side guides of the pa-
per tray may not be locked.
The end guide of the paper
tray may not be locked.
You may have loaded pa-
per whose size cannot be
detected automatically.
The saddle stitching staple
cartridge for the Booklet
Finisher has been removed.
When a misfeed message
appears, it remains until
you open and close the cov-
er, as required.
You cannot use the paper
in the bypass tray for du-
plex printing.
The setting for the Paper
Type: Tray 1-3 is "1 Side
Copy".
Depending on the type of
paper, the paper opens as it
rebounds when it is folded.
Users are restricted by user
management.
Action
Check the side guides are locked. ⇒
p.132 "Changing the Paper Size"
Check that the end guide is locked.
⇒ p.132 "Changing the Paper Size"
When you use paper of a size that
cannot be detected automatically,
set the paper size. ⇒ p.79 "Tray Pa-
per Size: (Tray 2,3)", p.177 "Copy
Paper"
Reset the saddle stitching staple car-
tridge. ⇒ p.134 "d Adding Staples"
Clear misfed paper and open and
close the front cover. ⇒ p.122 "x
Clearing Misfeeds"
For duplex printing, select Tray 1-3
in Copier mode or with the printer
driver.
Select "2 Sided Copy" for Paper
Type: Tray 1-3⇒ p.80 "Paper Type:
(Tray1-3, LCT)"
Select a paper type with low re-
bound.
Enter the user code (up to 8-digits),
and then press the [#] key.