Ricoh Aficio 1075 Operating Instructions Manual page 441

Status
It takes too much The data is so large or complex that it takes time to process. If the Data In
time to resume indicator is blinking, data is being processed. Just wait until printing
printing. resumes.
The machine was in Energy Saver mode. To resume from Energy Saver
mode, it has to warm up, and this takes time. To disable Energy Saver
mode, select "Off" for "Energy Saver 1" in the System Settings menu. See
the General Settings Guide.
Paper is not fed When you are using a Windows operating system, printer driver settings
from the selected override those set using the display panel. Set the desired input tray using
tray. the printer driver.
See the printer driver's Help.
Solid lines are Make the following settings with the printer driver.
printed as broken
• Change the [Dithering] setting under the [Image Adjustments] tab in the
lines.
See the printer driver's Help.
Optional compo- You have to configure the option setup in printer properties when bidirec-
nents connected to tional transmission is not enabled.
the machine are
See the printer driver's Help.
not recognized
when using Win-
dows 95/98/Me,
Windows
2000/XP, and
Windows NT 4.0.
Images are print- The feed direction you selected and the feed direction selected in the print-
ed in the wrong er driver's Option Setup might not be the same. Set the machine's feed di-
orientation. rection and the printer driver's feed direction same.
See the printer driver's Help.
The printed image With certain functions, such as enlargement and reduction, the layout of
is different from the image might be different to that on the computer display.
the image on the
You might have selected to replace True Type fonts with machine fonts in
computer's dis-
the printing process.
play.
To print an image similar to the image on the computer display, make set-
tings to print True Type fonts as an image.
See the printer driver's Help.
Possible Causes, Descriptions, and Solutions
[Change User Settings] dialog box, under the [Print Quality] tab in the
RPCS™ printer driver's dialog box.
Other Printing Problems
4
41