Remarks; Do's And Don'ts - Ricoh Aficio 1075 Operating Instructions Manual

Hide thumbs Also See for Aficio 1075:

Table of Contents

• Unplug the power cord from the wall outlet before you move the machine.

While moving the machine, you should take care that the power cord will not

be damaged under the machine.

• Do not turn off the main power switch while the On indicator is lit or blink-

ing. This may cause damage to the hard disk or memory.

• Do not touch areas on or around the fusing unit. These areas get hot.

• After making copies continuously, the exposure glass may become warm—

this is not a malfunction.

• When you use this machine for a long time in a confined space without good

ventilation, you may detect an odd smell. To keep the workplace comfortable,

we recommend that you keep it well ventilated.

• The area around the ventilation hole may become warm. This is caused by ex-

haust air and is not a malfunction.

• Do not turn off the operation switch while copying or printing. Make sure all

copying or printing has finished.

• The machine might fail to produce good copy images if condensation forms

inside due to rapid temperature change.

• Do not open the covers of the machine while copying or printing. If you do,

misfeeds might occur.

• Do not move the machine while copying or printing.

• If you operate the machine improperly or a failure occurs, settings might be

lost. Be sure to make a note of your machine settings.

• The supplier shall not be liable for any loss or damage resulting from a failure

of the machine, loss of settings, or use of the machine.

7. REMARKS

Table of Contents