Wireless Mac Filter Setup - TRENDnet 12dBi User Manual

N300 wireless 12dbi outdoor 5ghz poe access point
Hide thumbs Also See for 12dBi:
Table of Contents

Advertisement

TRENDnet User's Guide
Session Timeout : The Session timeout is in the range of 0~60 seconds. The
default is 0 to disable re-authenticate service.
Amount of time before a client will be required to re-authenticate.
WEP 802.1X : When WEP 802.1x Authentication is enabled, please refer to the
following Dynamic WEP and RADIUS settings to complete configuration.
Radius Server Settings :
IP Address : Enter the IP address of the Authentication RADIUS server.
Port : By default, it's 1812. The port number used to communicate with RADIUS
server.
Shared secret : A secret key used between system and RADIUS server. Supports
8 to 64 characters.
Session Timeout : The Session timeout is in the range of 0~60 seconds. The
default is 0 to disable re-authenticate service.
Amount of time before a client will be required to re-authenticate.
Click Save button to save your changes. Click Reboot button to activate your changes
© Copyright 2012TRENDnet. All Rights Reserved.

Wireless MAC Filter Setup

Continue Virtual AP Setup section. For each Virtual AP setting, the administrator can
allow or reject clients to access each Virtual AP.
MAC Filter Setup : By default, it's "Disable". Options are Disable, Only Deny List
MAC or Only Allow List MAC.
Two ways to set MAC filter rules :
Only Allow List MAC.
The wireless clients in the "Enable" list will be allowed to access the Access Point;
All others or clients in the "Disable" list will be denied.
Only Deny List MAC.
The wireless clients in the "Enable" list will be denied to access the Access Point; All
others or clients in the "Disable" list will be allowed.
Add a station MAC : Enter MAC address (e.g. aa:bb:cc:00:00:0a) and click "Add" button,
then the MAC address should display in the "Enable" List.
There are a maximum of 20 clients allowed in this "Enable" List. The MAC addresses of
the wireless clients can be added and removed to the list using the Add and Remove
buttons.
Click Reboot button to activate your changes
TEW-676APBO
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tew-676apbo

Table of Contents