Wireless Mac Filter; Client Bridge; Basic - TRENDnet TEW-821DAP User Manual

TRENDnet User's Guide

Wireless MAC filter

Wireless (2.4GHz or 5GHz) > Wireless MAC Filter
Every network device has a unique, 12-digit MAC (Media Access Control) address. Using
wireless MAC filters, you can allow or deny specific wireless clients using this router's
wireless network.
1. Log into your management page (see
2. Click on the wireless band you would like to configure and click Wireless MAC Filter.
3. Review the settings and click Apply to save settings.
 Filter Mode: Select from the pull down list the MAC filter rule to apply.
o Disable: Select to turn off MAC filter feature
o DENY: Select this option to DENY all listed MAC addressed
o ALLOW: Select this option to only ALLOW the listed MAC address to the the
network.
 MAC Address: Enter the MAC address to apply on the MAC filter rule
MAC Filter List
 MAC: List of all MAC addresses
 Delete: Click to delete selected MAC address
© Copyright 2015 TRENDnet. All Rights Reserved.
"Access the management page" on page 16).

Client Bridge

Basic

Wireless (2.4GHz or 5GHz) > Wireless Network
This section outlines the available features to configure for both wireless 2.4Ghz and
5GHz when Access Point mode is selected.
1. Log into your management page (see
2. Click on the wireless band you would like to configure and click Wireless Network.
3. Configure the below settings and click Apply to save settings.
 Wireless Mode: Select the wireless mode to set on the selected wireless band in
client bridge mode
 SSID: Manually enter the wireless network name (SSID) you want to establish
connection. Or simply click on Site Survey to scan for available wireless network.
TEW-821DAP
"Access the management page" on page 16).
20