Table of Contents
Advertisement
TRENDnet User's Guide
a number between 8 to 8192, default upload is 128 Kbps, download is 1024
Kbps.
Click "Add" button to add QoS rule to List. There are 10 rules maximum allowed in this
QoS List. All rules can be removed or edited on the List. Click Reboot button to activate
your changes.
When you create rules on the QoS List, the previous rules have higher priority. . Below
depict the examples for explaining priority of QoS setup.
Example 1 : On this setting, the FTP has 1024 Kbps upload and 8196 Kbps
download on 192.168.2.10. The remaining IP address and other remaining
protocol of IP address 192.168.2.10 only can use total bandwidth 512 Kbps
bandwidth. Because rule 1's priority is higher than rule 2
Example 2 : On this setting, the FTP has 512 Kbps upload and 512 Kbps
download on 192.168.2.10 Because rule 1's priority is higher than rule 2
Resource Sharing
DMZ
DMZ is commonly work with the NAT functionality as an alternative of Virtual
Server(Port Forwarding) while wanting all ports of DMZ host visible to Internet users.
Virtual Server rules have precedence over the DMZ rule. In order to use a range of ports
available to access to different internal hosts Virtual Server rules are needed.
Remote Bass
WAN
Please click on Advance -> DMZ and follow the below setting.
© Copyright 2012TRENDnet. All Rights Reserved.
192..2.x
WDS
SSID:
DMZ
WLAN
NAT
DMZ : By default, it's "Disable". Check Enable radial button to enable DMZ.
IP Address : Enter IP address of DMZ host and only one DMZ host is supported.
Click Save button to save your changes. Click Reboot button to activate your changes.
Virtual Server (Port Forwarding)
"Virtual Server" can also referred to as "Port Forward" as well and used interchangeably.
Resources in the network can be exposed to the Internet users in a controlled manner
including on-line gaming, video conferencing or others via Virtual Server setup. Don't
repeat ports' usage to avoid confusion.
Suppose you want to assign ports 21-25 to one FTP, Telnet and SMTP server (A in the
example), and port 80 to another (B in the example). You assign the LAN IP addresses
and the ISP assigns the WAN IP address. The NAT network appears as a single host on
the Internet.
Remote Bass
WAN
TEW-676APBO
WDS
B
SSID:
A
WLAN
NAT
117
Advertisement
Table of Contents
