Mac Filter Setup - TRENDnet TEW-455APBO User Manual

3.2.4 MAC Filter Setup
Continued from the 3.2.3.1 Virtual AP Overview section, Click Setup button on the MAC Filter Setup column,
and then a Virtual AP MAC Filter setup page appears. The administrator can allow or reject clients to access
each Virtual AP.
MAC Filter Setup : By default, it's "Disable". Options are Disabled, Only Deny List MAC or Only Allow List
MAC. Click Save button to save your change.
Two ways to set the MAC filter rules:
Only Allow List MAC.
The wireless clients in the ACL List will be allowed to access to Access Point; All others will be denied.
Only Deny List MAC.
The wireless clients in the ACL List will be denied to access to Access Point; All others will be allowed.
MAC Address: Enter MAC address (e.g. aa:bb:cc:00:00:0a) and click "Add" button, then the MAC address
should display in the ACL List.
There are a maximum of 20 clients allowed in this MAC Filter List. The MAC addresses of the wireless clients
can be added and removed to the list using the Add and Delete buttons.
Click Reboot button to activate your changes
MAC Access Control is the weakest security approach.WPA or WPA2 security method is highly recommended.
TEW‐455APBO High Power Wireless Outdoor PoE Access Point
34
User Manual