Extra Info - TRENDnet 12dBi User Manual

TRENDnet User's Guide
Link Status :

Status : Shows the current link status. It should be "Connected" or

"Disconnected".
ESSID : Shows the current SSID, which must be the same on the wireless client

and AP in order for communication to be established.
BSSID : Shows the associated BSSID, which can be used to identify the wireless

access point.
Extra Info : Shows the current link status of extra information. It should be

"Link is Up" or "Link is Down",
Channel : Shows current channel and central channel, its corresponding

frequency.
Link Speed(Mbps) : The data transfer speed adopted by this network.

(measured in Mbits per second)
Link Quality : Shows the link quality of the system with an access point.

Signal Strength ANT0/ANT1 : Shows the wireless signal strength of the

connection between system and an access point.
HT Status :

Channel BandWidth : Shows the current channel bandwidth used for

communication. It should be "20" or "40"
Guard Interval : Shows the current GI used for communication. It should be

"short" or "long".
MCS : Shows the current GI used for communication. It should be between 0

to 15 or 32.
Transmit Statistics

Frames Transmitted Successfully: The number of successfully transmitted

frames.
Frames Transmitted Successfully Without Retry: The number of successfully

transmitted frames without any retry.
Frames Transmitted Successfully After Retry(s): The number of successfully

transmitted frames with one or more retries.
Frames Fail To Receive ACK After All Retries: The number of unsuccessfully

transmitted frame with many retries.
RTS Frames Successfully Receive CTS: The number of successful received CTS

(Clear To Send) response after this TEW-676APBO sends out the RTS (Request
To Send) message.
RTS Frames Fail To Receive CTS: The number of unsuccessful received CTS

© Copyright 2012TRENDnet. All Rights Reserved.
response after this TEW-676APBO sends out the RTS message.
Receive Statistics

Frames Received Successfully: The number of successful received frames.

Frames Received With CRC Error: The number of received frames with CRC

(Cyclical Redundancy Checking) error.
Frames Dropped Due To Out-of-Resource: The number of dropped frames.

Duplicate Frames Received: The number of duplicate frames.


Extra Info

Users could pull out information such as Route table, ARP table, MAC table, Bridge table
or STP available in the drop-down list from system. The "Refresh" button is used to
retrieve latest table information.
TEW-676APBO
55