Table of Contents
Advertisement
TRENDnet User's Guide
Count : By default, it's 5 and the range is from 1 to 50. It indicates number of
connectivity test.
Traceroute : Allows tracing the hops from the TEW-676APBO device to a selected
outgoing IP
address. It should be used for the finding the route taken by ICMP packets across
the network to the destination host. The test is started using the Start button, click
Stop button to stopped test
Destination Host : Specifies the Destination Host for the finding the route
taken by ICMP packets across the network.
MAX Hop : Specifies the maximum number of hops( max time-to-live value)
traceroute will probe.
Reboot
This function allows user to restart system with existing or most current settings when
changes are made. Click Reboot button to proceed and take around three minutes to
complete.
A reminder will be available for remaining time to complete. If power cycle is necessary,
please wait till completion of the reboot process.
© Copyright 2012TRENDnet. All Rights Reserved.
Mounting bracket installation
Package contents
Install mounting triangle
Align the mounting triangle to the back of the access point. Securely tighten the
mounting triangle by using the M5x10 screws and washers.
TEW-676APBO
129
Advertisement
Table of Contents
