TRENDnet User's Guide
Next, in the "Control panel", open the "Administrative Tools" and then open
3.
"Services". Scroll down until you find the "SSDP Discovery Interface". If the Status
is not Started, double-click on SSDP Discovery Interface to open the service
properties. Change the startup type to Automatic, then close the properties. Now,
right-click on SSDP Discovery Services, and choose Start from the pop-up menu. The
SSDP Discovery Service will then be running and start each time you boot.
4.
After enabling UPnP and starting the SSDP Discovery Service, it may take few
minutes for the "TEW-675APBO/ TEW-676APBO" to be discovered and appear in
your "My Network Places".
© Copyright 2012TRENDnet. All Rights Reserved.
TEW-676APBO
143