Table of Contents
Advertisement
TRENDnet User's Guide
Remote AP
SSID, MAC address, antenna 0/1 received signal strength and channel bandwidth for
associated AP are available.
ESSID : Shows the current ESSID, which must be the same on the wireless client and
AP in order for communication to be established.
MAC Address : Display MAC address of associated AP.
Signal Strength ANT0/ANT1 : Shows the wireless signal strength of the connection
between system and an access point.
BandWidth : Shows the current channel bandwidth used for communication. It
should be "20" or "40"
© Copyright 2012TRENDnet. All Rights Reserved.
Extra Info
Users could pull out information such as Route table, ARP table, MAC table, Bridge table
or STP available in the drop-down list from system. The "Refresh" button is used to
retrieve latest table information.
Netstat Information : Select "NetStatus Information" on the drop-down list, the
connection track list should show-up, the list can be updated using the Refresh
button.
NetStatus will show all connection track on the system, the information include
TEW-676APBO
80
Advertisement
Table of Contents
