Wireless Mac Filter Setup - TRENDnet TEW-738APBO User Manual

TRENDnet User's Guide

Wireless MAC Filter Setup

Continue Virtual AP Setup section. For each Virtual AP setting, the administrator can
allow or reject clients to access each Virtual AP.
MAC Filter Setup: By default, it's "Disable". Options are Disable, Only Deny List
•
MAC or Only Allow List MAC.
Two ways to set MAC filter rules:
Only Allow List MAC: The wireless clients in the "Enable" list will be allowed to
o
access the Access Point; All others or clients in the "Disable" list will be denied.
Only Deny List MAC: The wireless clients in the "Enable" list will be denied to
o
access the Access Point; All others or clients in the "Disable" list will be allowed.
Add a station MAC: Enter MAC address (e.g. aa:bb:cc:00:00:0a) and click "Add" button,
then the MAC address should display in the "Enable" List.
There are a maximum of 20 clients allowed in this "Enable" List. The MAC addresses of
the wireless clients can be added and removed to the list using the Add and Remove
buttons. Click Reboot button to activate your changes
© Copyright 2014TRENDnet. All Rights Reserved.
Wireless Network Expansion
The administrator could create WDS Links to expand wireless network. When WDS is
enabled, access point functions as a wireless bridge and is able to communicate with
other access points via WDS links. A WDS link is bidirectional and both side must
support WDS. Access points know each other by MAC Address. In other words, each
access point needs to include MAC address of its peer. Ensure all access points are
configured with the same channel and own same security type settings.
Please click on Wireless -> WDS Setup and follow the below setting.
Security Type: Option is "Disable", "WEP", "TKIP"or "AES" from drop-down list.
•
Needs the same type to build WDS links. Security type takes effect when WDS is
TEW-738APBO
Remote Bass Station
WDS
SSID:
22