TRENDnet User's Guide
CPE Mode Configuration
When CPE mode is chosen, the system can be configured as a Customer Premises
Equipment(CPE). This section provides detailed explanation for users to configure in the
CPE mode with help of illustrations. In the CPE mode, functions listed in the table below
are also available from the Web-based GUI interface.
OPTION
System
Wireless
Operating
General
Mode
Wireless
WAN
LAN
Functions
DDNS
Management
Time Server
UPNP
SNMP
CPE Mode Functions
© Copyright 2012TRENDnet. All Rights Reserved.
Advance
Utilities
Profiles
DMZ
Setup
Settings
Firmware
IP Filter
Profile
Upgrade
Site
Network
MAC Filter
Survey
Utility
Virtual
Reboot
Server
Parental
Control
QoS
External Network Connection
Network Requirement
It can be used as an Outdoor Customer Premises Equipment (CPE) to receive wireless
signal over last mile application, helping WISPs deliver wireless broadband Internet
service to residents and business customers. In the CPE mode, TEW-676APBO is a
gateway enabled with NAT and DHCP Server functions. The wired clients connected to
Status
TEW-676APBO are in different subnet from those connected to Main Base Station, and,
System
in CPE mode, it does not accept wireless association from wireless clients.
Overview
Station
Statistics
Extra Info
QoS Plot
Event Log
N
A
Main
WIFI WAN
CPE mode network configuration
TEW-676APBO
38