Wireless Lan Network Creation; Wireless General Setup - TRENDnet 12dBi User Manual

TRENDnet User's Guide
DHCP : Check Enable button to activate this function or Disable to deactivate

this service.
Start IP / End IP: Specify the range of IP addresses to be used by the DHCP

server when assigning IP address to clients. The default range IP address is
192.168.2.10 to 192.168.2.70, the netmask is 255.255.255.0
DNS1 IP : Enter IP address of the first DNS server; this field is required.

DNS2 IP : Enter IP address of the second DNS server; this is optional.

WINS IP : Enter IP address of the Windows Internet Name Service (WINS)

server; this is optional.
Domain : Enter the domain name for this network.

Lease Time : The IP addresses given out by the DHCP server will only be valid

for the duration specified by the lease time. Increasing the time ensure client
operation without interruptions, but could introduce potential conflicts.
Lowering the lease time will avoid potential address conflicts, but might cause
more interruptions to the client while it will acquire new IP addresses from the
DHCP server. Default is 86400 seconds
Click Save button to save your changes. Click Reboot button to activate your changes
© Copyright 2012TRENDnet. All Rights Reserved.

Wireless LAN Network Creation

The network manager can configure related wireless settings, General Settings,
Advanced Settings, Virtual AP(VAP) Setting, Security Settings, and MAC Filter Settings.

Wireless General Setup

The administrator can change the data transmission, channel and output power settings
for the system. Please click on Wireless -> General Setup and follow the below setting.
TEW-676APBO
102