Copyright 2012Trendnet. All Rights Reserved; Resource Sharing; Dmz - TRENDnet 12dBi User Manual

N300 wireless 12dbi outdoor 5ghz poe access point
Hide thumbs Also See for 12dBi:
Table of Contents

Advertisement

TRENDnet User's Guide
Destination
Rule
Source IP
IP
1
192.168.2.10
2
Protocol : Select Any or specify protocol from drop-down list. When you select
ICMP or Layer 7 Application , the Source/ Destination Port cannot be used.
Local Port : Specify local port(LAN port) range required for this rule
Destination Port : Specify destination port range required for this rule
Action : After configuring rule, a policy rule ensures that a traffic flow gets the
requested treatment in the network.
Destination
Rule
Source IP
IP
1
2
192.168.2.10
Remark DSCP : Specify a new DSCP class, if you want to replace or remark the
DSCP
Bandwidth : Click "Enable" to activate function, and click "Disable" to
deactivate function
Upload / Download : Specify the bandwidth in kilobit per second (Kbps). Enter
a number between 8 to 8192, default upload is 128 Kbps, download is 1024
Kbps.
Click "Add" button to add QoS rule to List. There are 10 rules maximum allowed in this
QoS List. All rules can be removed or edited on the List. Click Reboot button to activate
your changes.
When you create rules on the QoS List, the previous rules have higher priority. . Below
depict the examples for explaining priority of QoS setup.
Example 1 : On this setting, the FTP has 1024 Kbps upload and 8196 Kbps
download on 192.168.2.10. The remaining IP address and other remaining
protocol of IP address 192.168.2.10 only can use total bandwidth 512 Kbps
© Copyright 2012TRENDnet. All Rights Reserved.
Remark
Bandwidth
DSCP
Protocol
DSCP
(Up/Down)
ANY
FTP
NO
1024/8196
ANY
ANY
NO
512/512
Remark
Bandwidth
DSCP
Protocol
DSCP
(Up/Down)
ANY
ANY
NO
512/512
ANY
FTP
NO
1024/8196
bandwidth. Because rule 1's priority is higher than rule 2
Example 2 : On this setting, the FTP has 512 Kbps upload and 512 Kbps
download on 192.168.2.10 Because rule 1's priority is higher than rule 2

Resource Sharing

DMZ

DMZ is commonly work with the NAT functionality as an alternative of Virtual
Server(Port Forwarding) while wanting all ports of DMZ host visible to Internet users.
Virtual Server rules have precedence over the DMZ rule. In order to use a range of ports
available to access to different internal hosts Virtual Server rules are needed.
Main
Please click on Advance -> DMZ and follow the below setting.
TEW-676APBO
N
SSID: Repeater
LAN
WIFI WAN
75

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tew-676apbo

Table of Contents