Mac Filter Setup - TRENDnet 12dBi User Manual

N300 wireless 12dbi outdoor 5ghz poe access point
Hide thumbs Also See for 12dBi:
Table of Contents

Advertisement

TRENDnet User's Guide
the system via telnet from your subnet, not others, the Example 1 demonstrates it, not
rules in the Example 2.
Example 1 : Create a higher priority rule to allow IP address 192.168.2.2 Telnet
access from LAN port first, and deny Telnet access from remaining IP addresses
in the same subnet.
Source
Destination
Rule
IP/Mask
Port
IP/Mask
192.168.2.2/
192.168.2.254/
1
32
32
192.168.2.0/
192.168.2.254/
2
24
32
Example 2 : All Telnet access to the system from the IP addresses of subnet
192.168.2.x works with the rule 1 of Example 2. The rule 2 won't make any
difference.
Source
Destination
Rule
IP/Mask
Port
IP/Mask
192.168.2.0/2
192.168.2.254
1
4
/32
192.168.2.2/3
192.168.2.254
2
2
/32

MAC Filter Setup

Allows to create MAC filter rules to allow or deny unicast or multicast packets from
limited number of MAC addresses. Important to note that MAC filter rules have
precedence over IP Filter rules.
Please click on Advance -> MAC Filter Setup and follow the below setting.
© Copyright 2012TRENDnet. All Rights Reserved.
I/O
Protocol
L
Act
Port
22
In
TCP
n
Pass
22
In
TCP
n
Deny
I/O
Protocol
L
Action Side
Port
22
In
TCP
n
Deny
22
In
TCP
n
pass
Side
LAN
LAN
MAC Filter Rule : By default, it's "Disable". Options are Disabled, Only Deny List
MAC or Only Allow List MAC. Click Save button to save your change.
Two ways to set the MAC Filter List:
Only Allow List MAC.
The wireless clients in the MAC Filter List will be allowed to access to Access Point;
All others will be denied.
Only Deny List MAC.
The wireless clients in the MAC Filter List will be denied to access to Access Point;
All others will be allowed.
LAN
MAC Address : Enter MAC address (e.g. aa:bb:cc:00:00:0a) and click "Add" button,
then the MAC address should display in the MAC Filter List.
LAN
There are a maximum of 20 clients allowed in this MAC Filter List. The MAC addresses of
the wireless clients can be added and removed to the list using the Add and Delete
buttons.
Click Reboot button to activate your changes
TEW-676APBO
46

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tew-676apbo

Table of Contents