Download
Share
Print this page
TRENDnet TEW-653AP Quick Installation Manual
  1. Manuals
  2. Brands
  3. TRENDnet Manuals
  4. Wireless Access Point
  5. TEW-653AP
  6. Quick installation manual

TRENDnet TEW-653AP Quick Installation Manual

300 mbps wireless n poe access point
Hide thumbs Also See for TEW-653AP:

Advertisement

Quick Links

See also: User Manual
Quick Installation Guide
TEW-653AP
1.01

Advertisement

loading

Related Manuals for TRENDnet TEW-653AP

Summary of Contents for TRENDnet TEW-653AP

  • Page 1 Quick Installation Guide TEW-653AP 1.01...

  • Page 2: Table Of Contents

    Table of Contents English 1. Before You Start 2. Hardware Installation 3. Power-over-Ethnernet Installation 4. Configure the Access Point 5. Mounting Troubleshooting Version 11.16.2009...

  • Page 3: English

    1. Before You Start Package Contents TEW-653AP Multi-Language Quick Installation Guide CD-ROM User’s Guide Cat. 5 Ethernet Cable (1m / 3.3ft.) Power Adapter (12V DC, 1A) Mounting Kit System Requirements Web Browser: Internet Explorer (6.0 or higher) A computer with a network adapter properly installed. A network Switch or Hub with an available network LAN port.

  • Page 4: Hardware Installation

    2. Hardware Installation Note: Locate an optimum location for the Access Point. The best place for the Access Point is usually at the center of your wireless network. Please connect the computer configuring the TEW-653AP to the same switch/hub. 1. Run a RJ-45 cable and the power adapter through the cable clip on the TEW-653AP.

  • Page 5: Power-Over-Ethnernet Installation

    3. Power-over-Ethernet Installation Using the TEW-653AP with a PoE switch 1. Connect a RJ-45 cable from the Power-Over- Ethernet Switch (e.g. TRENDnet TPE-80WS) to the LAN port on the Access Point. 2. Verify that the wireless, LAN and power LEDs are on.
  • Page 6 Using the TEW-653AP with the TPE-111GI 1. Connect the Power Cord to the Power Adapter. 2. Connect the Power Adapter to the DC 48V IN connector on the TPE-111GI. Then connect the Power Cord to an outlet. 3. Connect a CAT-5 cable from a switch to the TPE-111GI's DATA IN port.

  • Page 7: Configure The Access Point

    4. Configure the Access Point Note: It is recommended that you configure the Access Point from a wired computer. Before the Access Point can be configured, a Static IP address must be assigned to your computer's network adapter in the subnet of 192.168.10.X. Since the Access Point's default IP address is 192.168.10.100, make sure no other network devices are assigned an IP address of 192.168.10.100.
  • Page 8 4. Click Next. 5. Select AP Mode and then click Next. Note: 1. To protect your network from any unauthorized access it is recommended to enable wireless encryption. 2. The examples below are for WPA2-PSK security. If you select WPA-PSK or WPA2-PSK, make sure your wireless adapters support WPA or WPA2.
  • Page 9 Your configuration is complete For detailed information regarding the TEW-653AP’s configuration and advanced settings, please refer to the Troubleshooting section, User's Guide CD-ROM, or TRENDnet's website at http://www.trendnet.com. Register Your Product To ensure the highest level of customer service and support, please take a moment to www.trendnet.com/register...

  • Page 10: Mounting

    5. Mounting 1. Use the mounting plate as a template and mark the wall for the correct screw position. 2. Drill holes for the screws at the marked positions on the wall. 3. Use the provided wood screws to secure the mounting plate to the wall.

  • Page 11: Troubleshooting

    Troubleshooting How do I configure TCP/IP settings on my computer? Windows Vista 1. Go into the Control Panel, click Network and Internet, click Network and Sharing Center, click Manage Network Connections and then right-click the Local Area Connection icon and then click Properties.
  • Page 12 3. Unplug power to the switch, wait 15 seconds, then plug the power back in. 4. Plug the device into a different port on the PoE switch. 5. Try using another Cat-5e cable. If you still encounter problems or have any questions regarding the TEW-653AP, please contact TRENDnet's Technical Support Department.
  • Page 13 Wireless Tips The following are some general wireless tips to help minimize the impact of interference within an environment. Assign your network a unique SSID Do not use anything that would be identifying like “Smith Family Network”. Choose something that you would easily identify when searching for available wireless networks. Do not turn off the SSID broadcast The SSID broadcast is intended to be on and turning it off can cause connectivity issues.
  • Page 14 2. Keep the number of obstructions to a minimum. Each obstruction can reduce the range of a wireless device. Position the wireless devices in a manner that will minimize the amount of obstructions between them. 3. Building materials can have a large impact on your wireless signal. In an indoor environment, try to position the wireless devices so that the signal passes through less dense material such as dry wall.
  • Page 16 The source codes are available for download from TRENDnet's web site (http://trendnet.com/downloads/list_gpl.asp) for at least three years from the product shipping date. You could also request the source codes by contacting TRENDnet. 20675 Manhattan Place, Torrance, CA 90501, USA. Tel: +1-310-961-5500 Fax: +1-310-961-5511.
  • Page 17 GPL/LGPL informações Gerais Este produto TRENDnet inclui software gratuito desenvolvido por terceiros. Estes códigos estão sujeitos ao GPL (GNU General Public License) ou ao LGPL (GNU Lesser General Public License). Estes códigos são distribuídos SEM GARANTIA e estão sujeitos aos direitos autorais dos desenvolvedores. TRENDnet não presta suporte técnico a estes códigos.
  • Page 18 Product Warranty Registration Please take a moment to register your product online. Go to TRENDnet’s website at http://www.trendnet.com/register Copyright ©2009. All Rights Reserved. TRENDnet.