Access Point Association; Configure Wireless General Setting - TRENDnet 12dBi User Manual

TRENDnet User's Guide
IP Gateway : The default gateway of the LAN port; default Gateway is

192.168.2.1
Dynamic IP : This configuration type is applicable when the TEW-676APBO is

connected to a network with the presence of a DHCP server; all related IP
information will be provided by the DHCP server automatically.
Hostname : The Hostname of the LAN port

DNS : Check either "No Default DNS Server" or "Specify DNS Server IP" button as

desired to set up the system DNS.
Primary : The IP address of the primary DNS server.

Secondary : The IP address of the secondary DNS server.

DHCP Setup : Devices connected to the system can obtain an IP address

automatically when this service is enabled.
DHCP : Check Enable button to activate this function or Disable to deactivate

this service.
Start IP / End IP: Specify the range of IP addresses to be used by the DHCP

server when assigning IP address to clients. The default range IP address is
192.168.2.10 to 192.168.2.70, the netmask is 255.255.255.0
DNS1 IP : Enter IP address of the first DNS server; this field is required.

DNS2 IP : Enter IP address of the second DNS server; this is optional.

WINS IP : Enter IP address of the Windows Internet Name Service (WINS)

server; this is optional.
Domain : Enter the domain name for this network.

© Copyright 2012TRENDnet. All Rights Reserved.
Lease Time : The IP addresses given out by the DHCP server will only be valid

for the duration specified by the lease time. Increasing the time ensure client
operation without interruptions, but could introduce potential conflicts.
Lowering the lease time will avoid potential address conflicts, but might cause
more interruptions to the client while it will acquire new IP addresses from the
DHCP server. Default is 86400 seconds
Click Save button to save your changes. Click Reboot button to activate your changes

Access Point Association

Configure Wireless General Setting

The administrator can change the data transmission, channel and output power settings
for the system. Please click on Wireless -> General Setup and follow the below setting.
TEW-676APBO
84