Wds Mode Configuration; External Network Connection; Network Requirement; Configure Lan Ip - TRENDnet 12dBi User Manual

TRENDnet User's Guide

WDS Mode Configuration

Please refer to illustrations of the section 1.3 for possible applications in the WDS mode.
This section provides detailed explanation for users to configure in the WDS mode with
help of illustrations. In the WDS mode, functions listed in the table below are also
available from the Web-based GUI interface.
Option System Wireless
Operating General Setup
LAN Advanced Setup
Functions
Management WDS Setup
Time Server
SNMP
WDS Mode Functions

External Network Connection

Network Requirement

You could expand your Ethernet network via WDS link. In this mode, the TEW-676APBO
connects directly to a wired LAN, and wirelessly bridges to a remote access point via a
WDS link as shown in Figure 4-1. In the mode, it can't associate with any wireless clients.
Point to Point network Configuration
© Copyright 2012TRENDnet. All Rights Reserved.
Utilities Status
Profiles Settings System
Firmware WDS Status
Network Utility Extra Info
Reboot Event Log
WDS

Configure LAN IP

Here are the instructions for how to setup the local IP Address and Netmask.
Please click on System -> LAN and follow the below setting.
Mode : Check either "Static IP" or "Dynamic IP" button as desired to set up the

system IP of LAN port .
Static IP : The administrator can manually setup the LAN IP address when

static IP is available/ preferred.
IP Address : The IP address of the LAN port; default IP address is

192.168.2.254
IP Netmask : The Subnet mask of the LAN port; default Netmask is

255.255.255.0
IP Gateway : The default gateway of the LAN port; default Gateway is

192.168.2.1
Dynamic IP : This configuration type is applicable when the TEW-676APBO is

connected to a network with the presence of a DHCP server; all related IP
information will be provided by the DHCP server automatically.
Hostname : The Hostname of the LAN port

DNS : Check either "No Default DNS Server" or "Specify DNS Server IP" button as

desired to set up the system DNS.
Primary : The IP address of the primary DNS server.

Secondary : The IP address of the secondary DNS server.

Click Save button to save your changes. Click Reboot button to activate your changes
TEW-676APBO
29