Router Ap Mode Configuration; External Network Connection; Network Requirement - TRENDnet 12dBi User Manual

TRENDnet User's Guide

Router AP Mode Configuration

When Router AP mode is chosen, the system can be configured as a Router with Access
Point and WDS function. This section provides detailed explanation for users to
configure in the Router AP mode with help of illustrations. In the Router AP mode,
functions listed in the table below are also available from the Web-based GUI interface.
OPTION System Wireless
Operating
General Setup
Mode
WAN Advanced Setup
LAN Virtual AP Setup MAC Filter
Functions
DDNS WDS Setup
Managemen
Time Server
UPNP
SNMP
Router AP Mode Functions
© Copyright 2012TRENDnet. All Rights Reserved.
Advance Utilities Status
Profiles System
DMZ
Settings Overview
Firmware Station
IP Filter
Upgrade Statistics
Network
Extra Info
l
Virtual
Reboot QoS Plot
Parental
Event Log
l
QoS

External Network Connection

Network Requirement

It can be used as an Router AP with WDS function. In this mode, TEW-676APBO is a
gateway enabled with NAT and DHCP Server functions. The wireless clients connected to
TEW-676APBO are in different subnet from those connected to Internet.
Remote Bass Station
WAN
Router AP mode network configuration
TEW-676APBO
WDS
WLAN
98