Web Management Interface Instructions; Ap Mode Configuration - TRENDnet 12dBi User Manual

TRENDnet User's Guide

Web Management Interface Instructions

TEW-676APBO supports web-based configuration. Upon the completion of hardware
installation, TEW-676APBO can be configured through a PC/NB by using its web browser
such as Internet Explorer version 6.0.
Default IP Address : 192.168.10.100

Default IP Netmask : 255.255.255.0

Default User Name and Password : root/root

The default user name and password for both root manager account and admin
manager account are as follows:
Router
Mode CPE
AP
Management
Root Root
Account
User Name root root
Password default default admin default default default default admin
Step
IP Segment Set-up for Administrator's PC/NB

Set the IP segment of the administrator's computer to be in the same range as
TEW-676APBO for accessing the system. Do not duplicate the IP Address used here
with IP Address of TEW-676APBO or any other device within the network
Example of Segment :
The valid range is 1 ~ 254 and 192.168.10.254 shall be avoided because it is already
assigned to TEW-676APBO . 192.168.10.10 is used in the example below.
IP Address : 192.168.10.10

IP Netmask : 255.255.255.0

Launch Web Browser

Launch web browser to access the web management interface of system by
© Copyright 2012TRENDnet. All Rights Reserved.
UR +
AP WDS
CB
Admin Root Root Root Root
admin root root root Root
entering the default IP Address, http://192.168.10.254, in the URL field, and then
press Enter.
System Login

The system manager Login Page then appears.
Enter "root" as User name and "root" as Password, and then click OK to login to
the system; the root manager account is used as an example here.
Login Success

System Overview page will appear after successful login.

AP Mode Configuration

When AP mode is chosen, the system can be configured as an Access Point. This section
CPE + AP
provides detailed explanation for users to configure in the AP mode with help of
illustrations. In the AP mode, functions listed in the table below are also available from
Admin
the Web-based GUI interface.
admin
Option
Functions
System Wireless
Operating Mode General Setup
LAN Advanced Setup
Management Virtual AP
Time Server WDS Setup
SNMP
AP Mode Functions
TEW-676APBO
Utilities Status
System
Profiles Settings
Overview
Firmware
Clients
Upgrade
Network Utility WDS Status
Reboot Extra Info
Event Log
13