Table of Contents
Advertisement
TRENDnet User's Guide
Configure LAN Setup
Here are the instructions for how to setup the local IP Address and Netmask.
Please click on System -> LAN and follow the below setting.
LAN IP : The administrator can manually setup the LAN IP address.
IP Address : The IP address of the LAN port; default IP address is
192.168.2.254
IP Netmask : The Subnet mask of the LAN port; default Netmask is
255.255.255.0
DHCP Setup : Devices connected to the system can obtain an IP address
automatically when this service is enabled.
© Copyright 2012TRENDnet. All Rights Reserved.
DHCP : Check Enable button to activate this function or Disable to deactivate
this service.
Start IP / End IP: Specify the range of IP addresses to be used by the DHCP
server when assigning IP address to clients. The default range IP address is
192.168.2.10 to 192.168.2.70, the netmask is 255.255.255.0
DNS1 IP : Enter IP address of the first DNS server; this field is required.
DNS2 IP : Enter IP address of the second DNS server; this is optional.
WINS IP : Enter IP address of the Windows Internet Name Service (WINS)
server; this is optional.
Domain : Enter the domain name for this network.
Lease Time : The IP addresses given out by the DHCP server will only be valid
for the duration specified by the lease time. Increasing the time ensure client
operation without interruptions, but could introduce potential conflicts.
Lowering the lease time will avoid potential address conflicts, but might cause
more interruptions to the client while it will acquire new IP addresses from the
DHCP server. Default is 86400 seconds
Click Save button to save your changes. Click Reboot button to activate your changes
TEW-676APBO
61
Advertisement
Table of Contents
