Table of Contents
Advertisement
TRENDnet User's Guide
Create Wireless Profile
The administrator can configure station profiles via this page.
Please click on Wireless -> Wireless Profile and follow the below setting.
MAC Address : The MAC address of the Wireless Station is displayed here.
Profile Name : Set different profiles for quick connection uses.
ESSID : Assign Service Set ID for the wireless system.
Security Type : Select an appropriate security type for association, the Security
Type can be selected in "NONE", "OPEN", "SHARED", "WPA-PSK", or "WPA2-PSK"
from drop-down list; the type needs to be the same as that associated access point.
OPEN / SHARED : OPEN and SHARED require the user to set a WEP key to
exchange data.
© Copyright 2012TRENDnet. All Rights Reserved.
Key Index : key index is used to designate the WEP key during data
transmission. 4 different WEP keys can be entered at the same time, but
only one is chosen.
WEP Key # : Enter HEX or ASCII format WEP key value; the system
supports up to 4 sets of WEP keys.
Key Length
Hex
64-bit
10 characters
128-bit
26 characters
WPA-PSK (or WPA2-PSK) : WPA (or WPA2) Algorithms, allows the system
accessing the network by using the WPA-PSK protected access.
Cipher Suite : Select the desired cipher suite from the drop-down list; the
options are AES and TKIP
Pre-shared Key : Enter the information for pre-shared key; the key can be
either entered as a 256-bit secret in 64 HEX digits format, or 8 to 63 ASCII
characters.
TEW-676APBO
ASCII
5 characters
13 characters
44
Advertisement
Table of Contents
