TRENDnet 12dBi User Manual page 108

TRENDnet User's Guide
Virtual AP Setup
For each Virtual AP, administrators can configure SSID, SSID broadcasting, Maximum
number of client associations, security type settings.
Click Edit button on the Edit column, and then a Virtual AP setup page appears.
Enable AP : By default, it's "Disable" for VAP1 ~ VAP6. The Primary AP always

enabled.
Select "Enable" to activate VAP or click "Disable" to deactivate this function
ESSID : Extended Service Set ID, When clients are browsing for available wireless

networks, this is the SSID that will appear in the list. ESSID will determine the
service type available to AP's clients associated with the specified VAP.
Client Isolation : Select Enable, all clients will be isolated from each other, that

means all clients can not reach to other clients. Below Figures depict Client Isolation
and AP Isolation
© Copyright 2012TRENDnet. All Rights Reserved.
Hidden SSID : By default, it's "Disable".

Enable this option to stop the SSID broadcast in your network. When disabled,
people could easily obtain the SSID information with the site survey software and
get access to the network if security is not turned on. When enabled, network
security is enhanced. It's suggested to enable it after AP security settings are
archived and setting of AP clients could make to associate to it.
Maximum Clients : The default value is 32. You can enter the number of wireless

clients that can associate to a particular SSID. When the number of client is set to 5,
only 5 clients at most are allowed to connect to this VAP.
TEW-676APBO
Cllent Isolation
VAP0
VAP1
VAP2
AP Isolation
108