Table of Contents
Advertisement
TRENDnet User's Guide
MAC Filter Setup
Allows to create MAC filter rules to allow or deny unicast or multicast packets from
limited number of MAC addresses. Note, the MAC filter rules have precedence over IP
Filter rules.
Please click on Advance -> MAC Filter Setup and follow the below setting.
MAC Filter Rule : By default, it's "Disable". Options are Disabled, Only Deny List
MAC or Only Allow List MAC. Click Save button to save your change.
Two ways to set the MAC Filter List:
Only Allow List MAC.
The wireless clients in the MAC Filter List will be allowed to access to Access Point;
All others will be denied.
Only Deny List MAC.
The wireless clients in the MAC Filter List will be denied to access to Access Point;
All others will be allowed.
MAC Address : Enter MAC address (e.g. aa:bb:cc:00:00:0a) and click "Add" button,
then the MAC address should display in the MAC Filter List.
There are a maximum of 20 clients allowed in this MAC Filter List. The MAC addresses of
the wireless clients can be added and removed to the list using the Add and Delete
buttons.
Click Reboot button to activate your changes
© Copyright 2012TRENDnet. All Rights Reserved.
Parental Control Setup
Parental Control allows you to block or allow specific kinds of Internet usage and traffic,
such as Internet access, designated services, and websites.
NAT
WAN
Please click on Advance -> Parental Control and follow the below setting.
TEW-676APBO
Station
WDS
SSID:
MSN
WLAN
113
Advertisement
Table of Contents
