TRENDnet 12dBi User Manual page 114

TRENDnet User's Guide
Rules : control can be managed by a rule. Use the settings on this screen to

establish an access policy.
Comment : Enter a descriptive name for this rule for identifying purposes.

MAC Address : Enter MAC address in valid MAC address

format(xx:xx:xx:xx:xx:xx) and click "Add" button to add in the MAC group of
each rule. Click "Remove" button can remove MAC address in the group of
each rule. There are 10 MAC address maximum allowed in each rule.
Local / Destination IP : Specify local(LAN)/ destination IP addresses range

required for this rule. If you specify local IP addresses range from 192.168.1.1
to 192.168.2.254. The matches a range of local IP addresses include every
single IP address from the first to the last, so the example above includes
everything from 192.168.1.1 to 192.168.2.254.
Protocol : Select Any or specify protocol(TCP, UDP, ICMP, URL Blocking and

© Copyright 2012TRENDnet. All Rights Reserved.
Application) from drop-down list. When you select ICMP or Layer 7
Application , the Local(LAN)/ Destination Port can not used.
If you want to block websites with specific URL address or using specific
keywords, enter each URL or keyworks in the "URL Blocking" field and click
"Add" button to add in the URL Blocking list of each rule. Click "Remove"
button can remove URL or keywords.
Local Port : Specify local port(LAN port) range required for this rule

Destination Port : Specify destination port range required for this rule

Active : Check Enable button to activate this rule, and Disable to deactivate.

Click "Add" button to add control rule to List. There are 10 rules maximum allowed in
this Control List. All rules can be removed or edited on the List. Click Reboot button to
activate your changes.
TEW-676APBO
114